Table of Contents
Advertisement
INSPECTION DETAILS - B. LOCKS AND LIGHTS
TURN SIGNAL, HEADLIGHT, HIGH BEAM*,
FOG LIGHTS AND EMERGENCY FLASHER
INDICATOR LIGHTS
a ) Check that the turn signal indicator lights on the
instrument panel illuminate when the turn signal lever is
moved up or down.
1
Right turn
2
Left turn
3
Move and hold the lever part way to signal a lane
change (Right)
4
Move and hold the lever part way to signal a lane
change (Left)
b ) Check that the headlight or tail light indicator light
illuminates when the headlight switch is on.
1
Turn off the daytime running light system.
2
The headlights and side marker, parking, tail,
license plate and instrument panel lights turn on and
off automatically. (When the "ENGINE" switch is
in "IG-ON" mode.)
3
The side marker, parking, tail, license plate and
instrument panel lights turn on.
4
The headlights and all lights listed above turn on.
NOTE:
• Headlights automatically turn off 30 seconds after
the "ENGINE" switch is turned to the ACCESSORY
mode or turned off and the driver's door is opened
and closed.
• When only the tail lights come on, the lights
automatically turn off with the driver's door opened
and the "ENGINE" switch turned to the
ACCESSORY mode or turned off.
c ) Check operation of the automatic light control function.
d ) Check that the high beam indicator light illuminates
when the high beams are on.
With the headlights on, push the lever forward to
1
turn on the high beams.
Pull the lever toward you and release it to fl ash the
2
high beams once.
17
* If equipped
GX 460
Advertisement
Table of Contents
