Remote Engine Starter - Lexus GX 460 2014 Pre-Delivery Service Manual

INSPECTION DETAILS - B. LOCKS AND LIGHTS

REMOTE ENGINE STARTER*

a ) Starting the Engine
1. Close and lock all doors.
2. Quickly press
for 3 seconds.
NOTE:
When the engine starts, the hazard lights will fl ash for
20 seconds.
b ) Stopping the Engine
1. Press or press and hold
POWER SUPPLY CHANGEOVER AND
ENGINE START/STOP
Check for proper activation of the "ENGINE" switch.
Power supply changeover
a ) Carry the electronic key in the vehicle and apply the
parking brake.
b ) Without depressing the brake pedal, press the
"ENGINE" switch and change the power supply.
1
OFF
2
Press once: ACCESSORY mode
3
Press twice: "IG-ON" mode
1
Press three times: OFF
c ) In each mode, check that the power supply has changed
properly.
NOTE:
If the "ENGINE" switch illuminator blinks refer to the Repair
Manual.
Engine start/stop
a ) Carry the electronic key in the vehicle and apply the
parking brake.
b ) Check that the shift lever is in the "P" position.
c ) When depressing the brake pedal, check that the green
"ENGINE" switch illuminator comes on, push the
"ENGINE" switch to start the engine.
d ) Press the "ENGINE" switch regardless of brake position
to stop the engine.
15
twice and then press and hold
for 2 seconds.
* If equipped
GX 460