Siemens Gigaset S45 Manual page 7

Gigaset S45 / USA EN / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 30.3.06
1. On the handset
¢ ¢
v Ð
Handset
s
Select base station, for exam-
ple
Base
~
Enter the system PIN of the
base station (the default is
0000) and press
screen will display the
number, for example
2. On the base station
Within 60 secs. press and hold the regis-
tration/paging key on the base station
(page 2) (approx. 3 secs.).
Headset socket
Most headsets with standard 2.5mm mini
plugs are compatible with this handset.
Charging batteries
¤
Plug the power adapter of the charging
cradle into an electrical outlet.
¤
Place the handset in the base with its
display facing forward.
To charge the batteries, leave the handset
in the charging cradle. If the handset is
activated, the flashing battery icon e in
the top right of the display indicates that
the batteries are charging. During handset
operation, the battery icon indicates the
charge status of the batteries (page 2).
Initial charging and discharging of
batteries
The correct charge level can only be dis-
played if the batteries are first fully
charged and discharged.
¤
To do this, leave the handset in the
charging cradle continuously for ten
hours. Your handset need not be
switched on for it to charge.
¤
Once the batteries are fully charged,
remove the handset from the charging
cradle and do not put it back again until
the batteries are fully discharged.
¢
Register H/Set
1, and press .
§OK§
. The
§OK§
Base 1.
Notes:
– The handset should only be placed in a
base station or charging cradle that is
designed for it.
– When the handset is in the cradle, it
charges even if it is switched off.
– If the handset has switched itself off
because the battery has no charge, and it is
then placed in the chargingcradle, it will
switch itself on automatically.
– After the first battery charge and discharge
you may replace your handset in the charg-
ing cradle after every call.
Please remember:
u
Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and re-
insert them.
u
The batteries may feel warm as they are
charging. This is normal.
Setting the date and time
To set the date and time, press the display
key to open the input menu.
§Time§
To change the time, open the input field
via:
¢ ¢
v Ð
Date/Time
¤
Change multiple line input:
Date:
Enter month, day and year in 6-digit
format.
Time:
Enter hours and minutes with 4 digits,
for example Q M 1 5 for
07:15 AM a.m.
Time mode:
Choose between 12 and 24-hour time
format.
If you have selected the 12-hour time for-
mat, use the display key
between am and pm.
Press the display key.
§Save§
First Steps
to switch
§am/pm§
7