Assembly - ProForm PFEL1303.3 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver
wrench , and a rubber mallet
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number following the key
number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a
part is not found in the parts bag, check to see if it has been pre-assembled.
M8 Nylon
M6 Washer
(58)–2
Locknut (46)–4
M4 x 16mm M4 x 16mm Round
Screw (66)–6 Head Screw (45)–1
M6 x 18mm Button M8 x 25mm Patch
Screw (67)–4
M8 x 45mm Button
Screw (102)–4
M4 x 52mm Screw (98)–2
M8 Split M8.5 Washer
Washer (94)–10 (53)–2
M4 x 14mm Round
Head Screw (93)–2
Screw (22)–2
M8 x 54mm Button
.
M10 Split
Washer (144)–2
M4 x 12mm
Screw (84)–6
M8 x 38mm Button
Screw (70)–2
Screw (33)–4
Union Bolt Set (27)–2
5
, an adjustable
Wave Washer
M10 Washer
(99)–2
(150)–2
M6 x 16mm Tapered
Button Screw (107)–8
M8 x 43mm Button
Bolt (50)–4
M10 x 35mm Carriage
Bolt (20)–2