Per-Phone Configuration - Phone1.Cfg - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint IP
4.6.2.1.5 SIP Logging <logging/> <level/> <change/>
Attribute
log.level.change.sip

4.6.3 Per-phone Configuration - phone1.cfg

This section covers the parameters in the per-phone example configuration file
phone1.cfg. This file would normally be used as a template for the per-phone config-
uration files. For more information, see 2.2.2.1.3 Deploying a SoundPoint
server on page 13.
4.6.3.1 Registration <reg/>
SoundPoint
ally be associated with a private array of servers for completely segregated signaling.
In the following table, x is the registration number. IP 500: x=1-3; IP 600: x=1-6
Attribute
reg.x.displayName
reg.x.address
reg.x.label
108
Permitted
Values
0-5
® IP supports up to six unique registrations. Each registration can option-
Permitted
Values
UTF-8 encoded
string
string in the for-
mat userPart or
user-
Part@domain
UTF-8 encoded
string
Copyright © 2004 Polycom, Inc.
Default Interpretation
4 This attribute controls the logging detail level
for the SIP component. These are the input fil-
ters for the internal memory-based log system.
Default Interpretation
Null Display name used for local user
interface as well as SIP signaling.
Null The actual address corresponding
to this registration (userPart or
userPart@polycom.com). For user
part only registration
(reg.x.address="1002"), the regis-
tration will be userPart@proxy-
HostNameOrIPAddress where
userPart is reg.x.address and proxy-
HostNameOrIPAddress is either
reg.x.server.1.address if non-Null
or voIpProt.server.1.address speci-
fied in sip.cfg.
Null Text label to appear on the display
adjacent to the associated line key.
If omitted, the label will be derived
from the user part of reg.x.address.
Optimizing SoundPoint
®
IP boot