Time And Date Display - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint

3.1.24 Time and Date Display

SoundPoint
certain operating modes such as when the telephone is idle. The clock and calendar
must be synchronized to a remote SNTP timeserver.
Central
(boot
server)
Local
32
®
IP
®
IP maintains a local clock and calendar. Time and date are displayed in
Configuration file:
ipmid.cfg
Web Server
(if enabled)
Local Phone User
Interface
Copyright © 2004 Polycom, Inc.
Set the time and date display formats.
• For more information, see 4.6.1.1.2 Date and Time
<datetime/> on page 58.
Set the basic SNTP settings.
• For more information, see 4.6.1.8.2 Time Synchro-
nization <SNTP/> on page 80.
Set daylight savings parameters.
• For more information, see 4.6.1.8.2 Time Synchro-
nization <SNTP/> on page 80.
Set the basic SNTP and daylight savings settings.
Navigate to: http://<phoneIPAddress>/coreConf.htm#ti
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server. They
will permanently override global settings unless deleted
via the Reset User Settings menu selection.
The basic SNTP settings can be made in the Network
Configuration menu.
• For more information, see 2.2.1.1 DHCP or Manual
TCP/IP Setup on page 5.
The user can edit the time and date format under the Set-
tings menu.
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server. They
will permanently override global settings unless deleted
via the Reset User Settings menu selection.
Features