Updating And Rebooting - Polycom SoundPoint IP 600 SIP Administrator's Manual

Administrator Guide - SoundPoint
Central
(boot
server)
Local

4.3 Updating and Rebooting

The bootROM, application executable, and configuration files can be updated auto-
matically via the centralized provisioning (boot server) model.
To automatically update:
1. Back-up old application and configuration files. The old configuration can be easily
2. Customize new configuration files or apply new or changed parameters to
3. Save the new configuration files and images (such as sip.ld) on the boot
4. Reboot the telephones (see below).
For more information, see 2.2.2 Application Configuration on page 9.
5. For TFTP, refer to 2.2.2.1.1 FTP vs. TFTP on page 10
®
IP
Configuration file:
phone1.cfg
Web Server
(if enabled)
Local Phone User
Interface
restored by reverting to the back-up files.
the old configuration files. Differences between old and new versions of
configuration files are explained in the Release Notes which accompany
the software.Changes to site-wide configuration files such as ipmid.cfg
can be done manually, but a scripting tool is useful to change per-phone
configuration files.
5
server.
Copyright © 2004 Polycom, Inc.
Specify the external NAT IP address and the ports to be used
for signaling and RTP traffic.
• For more information, see 4.6.3.6 Network Address
Translation <nat/> on page 116.
Specify the external NAT IP address and the ports to be used
for signaling and the RTP traffic.
Navigate to: http://<phoneIPAddress>/coreConf.htm#na
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will perma-
nently override global settings unless deleted via the Reset
User Settings menu selection.
None.
Optimizing SoundPoint
51