Per-Phone Configuration - Phone1.Cfg; Registration <Reg - Polycom SoundPoint IP 301 Administrator's Manual

Administrator Guide - SoundPoint
Attribute
mb.limits.cache

4.6.2 Per-phone Configuration - phone1.cfg

This section covers the parameters in the per-phone example configuration file
phone1.cfg. This file would normally be used as a template for the per-phone config-
uration files. For more information, see 2.2.2.1.2 Deploying a Boot Server for the
Phones on page 15.
4.6.2.1 Registration <reg/>
SoundPoint
®
Point IP 500 and 501 support three and SoundPoint
tration can optionally be associated with a private array of servers for completely
segregated signaling. SoundStation
In the following table, x is the registration number. IP 300 and 301: x=1-2; IP 500 and
501: x=1-3; IP 600: x=1-6; IP 4000: x=1.
Attribute
reg.x.displayName
reg.x.address
® ®
IP / SoundStation
Permitted Values
Null or positive
integer
®
IP 300 and 301 support a maximum of two unique registrations, Sound-
Permitted
Values
UTF-8 encoded
string
string in the for-
mat userPart or
user-
Part@domain
Copyright © 2005 Polycom, Inc.
IP
Default Interpretation
200 Limits the total size of objects down-
loaded for each page (both XHTML and
images). Once this limit is reached, no
more images are downloaded until the
next page is requested. Units = kBytes.
Increasing this value may have a detri-
mental effect on performance of the
phone.
®
IP 600 supports six. Each regis-
®
IP 4000 supports a single registration.
Default Interpretation
Null Display name used for local user inter-
face as well as SIP signaling.
Null The actual address corresponding to
this registration (userPart or user-
Part@polycom.com). For user part
only registration
(reg.x.address="1002"), the registra-
tion will be userPart@proxyHostNam-
eOrIPAddress where userPart is
reg.x.address and proxyHostNameOrI-
PAddress is either
reg.x.server.1.address if non-Null or
voIpProt.server.1.address specified in
sip.cfg.
Optimization
129