Saving Settings; Recalling A Preset - Peavey IPR2 3000 Operating Manual

Saving Settings

In the Memory Operation Sub Menu, select "Save Settings."
Select one of the four preset locations.
Edit the name by rotating the cursor to select the character
and pressing the encoder to step to the next position.
Continue until complete. To keep the same name, press the
encoder six times to step through the name edit screen.
Once the save location has been selected and you have
named the preset, you will be given a yes/no option to
complete the save.

Recalling a Preset

In the Memory Operation Sub Menu, select "Recall Settings."
Select the Preset number to recall or select "Recall Factory
Settings" to recall a neutral state. Just like the save function,
the option is given to exit without completing the recall
option.
Lock
The security lock feature of the IPR2
digit password must be set when the lock is engaged. This password must be entered whenever a Sub Menu is entered to
allow temporary access to the edit functions. The lock is re-engaged whenever you return the Main Menu or turn the unit off.
All editing is locked when the power is off.
Note: Be sure to make note of the password. Contact customer service if the password is lost or misplaced.
The IPR2 amplifiers have three different lock modes:
Off
All Except Volume
All with Volume
DSP allows selected controls to be locked to prevent unauthorized adjustment. A four-
™
All settings can be adjusted without entering a password.
A password must be entered for all edit Sub Menus except volume.
A password must be entered for all edit Sub Menus including volume.