Audio Jack Board - HP Spectre x360 13 Maintenance And Service Manual

Audio jack board

NOTE: The audio jack board spare part kit does not include the audio jack board cable. The audio jack
board cable is available using spare part number 942832-001.
Description
Audio jack board (includes audio jack, power button, power light, and USB port; does not include audio jack
board cable)
Before removing the audio jack board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Solid-state drive (see
c. Fans (see
d. System board (see
Remove the audio jack board:
1. Remove the two Phillips M2.0×2.8 screws (1) that secure the audio jack board to the keyboard/top cover.
2. Lift the front edge of the audio jack board (2) until it rests at an angle.
56 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 31)
Solid-state drive on page
Fans on page 35)
System board on page
29), and then remove the following components:
33)
51)
Spare part number
942831-001