Yamaha WaveRunner Service Manual page 434

INSP
ADJ
GENERAL
1
Lubrication points
1. Lubricate:
• Throttle cable (handlebar end)
Recommended lubricant:
Rust inhibitor
NOTE:
Before lubricating the throttle cable, remove
the throttle cable 1 from the throttle lever
assembly.
2. Lubricate:
• Throttle cable (throttle body end)
• Throttle bodies (throttle cable pulley,
throttle cam, and return spring)
Recommended lubricant:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
3. Lubricate:
• QSTS control cables (handlebar end)
Recommended lubricant:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
NOTE:
Before lubricating the QSTS control cables,
remove the QSTS cable housing cover. Spray
the rust inhibitor into the outer cables, and
apply grease to the inner cables.
46
E