Yamaha WaveRunner Service Manual page 433

INSP
ADJ
CONTROL SYSTEM/GENERAL
h. Install the handlebar cover.
Handlebar cover screw:
1.1 N • m (0.11 kgf • m, 0.8 ft • lb)
LOCTITE 242
i. Install the ribbon sub assemblies and air
filter case cover.
Ribbon sub assembly bolt:
6.5 N • m (0.65 kgf • m, 4.7 ft • lb)
LOCTITE 242
Air filter case cover screw:
2.5 N • m (0.25 kgf • m, 1.8 ft • lb)
LOCTITE 572
WARNING
After adjusting the free play, turn the han-
dlebar to the right and left and make sure
that the trolling speed does not increase.
GENERAL
Drain plug inspection
1. Inspect:
• Drain plugs
Cracks/damage → Replace.
• O-rings
Cracks/wear → Replace.
• Screw threads
Contaminants → Clean.
45
E