Table of Contents
Advertisement
CAPTURE MODE
Burst
This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter
release button is pressed. Secure ViviCam 7330 to a tripod or place it on a stable su rface.
1. Rotate the mode dial to
, or *).
2. Press the power switch to turn on the
power.
3. Press the four-way controller (A/tJ) and
(A)
use
to select [Burst]. You can also
change the setting using four-way
( t►).
controller
4. Press the OK button to confirm the setting. The
monitor screen.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture a sequence of images.
~~
•
In Burst mode, the flash mode will be set to
Auto Bracket
In this mode, ViviCam 7330 automatically changes the exposure within a set range to
take three shots after you press the shutter release button once. Auto Bracket settings
can be combined with exposure compensation settings to extend the adjustment range.
1. Rotate the mode dial to
',
*).
or
2. Press the power switch to turn on the
power.
3. Press the four-way controller
(A)
use
to select [AEB]. You can also
change the setting using the four-way
( t►).
controller
4. Press the OK button to confirm the setting. The
LCD monitor screen.
5. Press the shutter release button to capture the three images.
•
In AEB mode, the flash mode will be set to
P ,.'., A ,
A
Flash Off
A, A,
A , P ,
(A/
))
and
t
Flash Off
indicator is displayed on the
automatically.
l e"
Q
indicator is displayed on the
automatically.
Capture Mode
Burst - .
: ~
OK
\-iLiô ôi
Capture Mode
AEB
.
K:
O
Advertisement
Table of Contents
