Vivitar Vivicam 7028 User Manual

Vivitar Vivicam 7028 User Manual

Vivitar vivicam 7028: user guide

Advertisement

ViviCam 7028 Digital Camera

User Manual

© 2010 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

Advertisement

Table of Contents
loading

Summary of Contents for Vivitar Vivicam 7028

  • Page 1: User Manual

    ViviCam 7028 Digital Camera User Manual © 2010 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies.
  • Page 2: Table Of Contents

    Camera Technical Specifications ... 7 Computer System Requirements – WINDOWS OS ... 8 Computer System Requirements – MAC OS ... 8 Using Your Digital Camera ... 9 Changing Camera Mode ... 9 Navigating the Menus ... 10 Photo Capture Mode ... 11 Photo Playback Mode ...
  • Page 3: Introduction

    Note: Your camera needs an SD Memory card (up to 32GB) for normal use. SD Memory cards are not included and need to be purchased separately. Please read this manual carefully first in order to get the most out of your digital camera. What’s Included 1.
  • Page 4: Parts Of The Camera

    Parts of the Camera 1. Power Button 2. Shutter Button 3. LCD Screen 4. LED 5. Zoom Out 6. Zoom In 7. Mode Button 8. SET Button 9. Scene / Left Button 10. Flash / Up / Slideshow 11. Delete / Right Button 12.
  • Page 5: Initial Camera Setup

    When powering the camera ON for the first time the camera will take you through the initial camera setup. Powering the Camera ON Make sure the batteries have been inserted properly into your digital camera. Make sure an SD card has been inserted into your camera. Press the POWER...
  • Page 6 Setting the Camera Language You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice and press the SET button to confirm the selection. After selecting a language, you will be asked if you would like to continue with the initial camera setup.
  • Page 7: Main Camera Modes

    Photo Capture mode. Video Capture Mode Use this mode to capture videos with your digital camera. After turning on your camera, press the MODE button once to open the Video Capture mode. To take a video, aim your camera as desired and press the “Shutter” button to start the record.
  • Page 8: Camera Technical Specifications

    Camera Technical Specifications Image Sensor Image Resolution Video Resolution File Format Internal Memory External Memory LCD Display Lens Zoom Exposure White Balance Scene Flash Self-Timer Anti-Shake Face Detect Smile Capture Print Photos Macro Microphone Speaker Interface Language System Requirements Battery Working Temperature CMOS Sensor (7M) 3072x2304 pixels, (7MHD) 3648x2048 pixels, (5M)
  • Page 9: Computer System Requirements - Windows Os

    Computer System Requirements – WINDOWS OS To be able to download photos and videos to your PC, you will need the following minimum configuration:  Pentium 4 processor or above with Windows XP service pack 2, Windows Vista or Windows 7 ...
  • Page 10: Using Your Digital Camera

    OFF. You will see a “Goodbye” splash screen and then the camera will power off completely. Note: your digital camera also has an Auto Power Off feature that will automatically turn off your camera after a specific period of time that your camera is left idle. The Auto Power Off settings can be set from the Auto Power Off settings menu.
  • Page 11: Navigating The Menus

    To change the active camera mode, make sure the camera is powered ON and press the MODE button on the back of the camera. When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display When in Video Capture Mode, this icon will display on the top-left corner of the LCD display When in Playback Mode, this icon will display on the top-left corner of the LCD display Navigating the Menus...
  • Page 12: Photo Capture Mode

    Photo Capture Mode The Photo Capture mode allows you to capture pictures with your digital camera. Taking a Picture While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture.
  • Page 13 Photo Capture Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons: Button Icon appearing and Action Scene Selection – Opens the Scene menu Left Flash Options – Toggles the Flash options appearing on the LCD Delete –...
  • Page 14 Macro Switch Your camera contains a Macro Switch that allows you to manually enable or disable the Macro mode on your camera. While using the Macro mode, you can capture images at very close range. To turn the Macro mode ON, slide the Macro Switch up on the side of your camera to the flower icon.
  • Page 15 Photo Capture Mode Menus The following are the menus that appear in your camera‟s Photo Capture Mode:...
  • Page 16 Scene Menu The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current environment. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. Press the UP or DOWN direction control buttons to scroll through the menu options.
  • Page 17 Image Quality Menu The Image Quality menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. Press the SET button to open the menus for the current mode.
  • Page 18 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Anti-Shake Menu The Anti-Shake feature reduces image distortion that can be caused by movement of the camera while capturing the image.
  • Page 19  Facing the camera - The face of the subject(s) you are photographing must be facing the camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears around the subject`s face. Face Detect will not work with a side shot of the subject`s head. Press the SET button to open the menus for the current mode.
  • Page 20 Once a smile is detected the camera will automatically take the picture. Smile Capture will not work with a side shot of the subject`s head. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. Press the UP or DOWN direction control buttons to scroll through the menu options.
  • Page 21 Color Effect Menu You can choose to add a color effect to the images taken with your camera. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. Press the UP or DOWN direction control buttons to scroll through the menu options.
  • Page 22 Image Sharpness Menu You can set the level of sharpness in the images taken with your camera. The sharpness level dictates if the edges of objects in the image are more or less distinct. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
  • Page 23 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. ISO Menu The ISO menu allows you to set the level of sensitivity that your camera has to light in the surrounding environment.
  • Page 24 Multi – Used in standard conditions the camera divides and adjusts the settings of the image into several zones for light metering such as complex light conditions, position of subject, brightness, background, direct light and scenes Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure on the subject in the center of the monitor.
  • Page 25 Date/Time Menu When you capture an image with your camera, the image will include a time stamp with the date and time that the image was taken. The Date/Time menu allows you to set your camera‟s date and time as desired. You can also disable the timestamp for future images that will be taken with your camera.
  • Page 26 Silent Mode Menu You have the option of activating the camera‟s silent mode to disable all of the sound effects that the camera emits when performing camera functions. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
  • Page 27 Frequency Menu The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale. If your camera is set to a frequency that does not match your country‟s electric current, you may see waves on the images taken by your camera. Press the SET button to open the menus for the current mode.
  • Page 28: Photo Playback Mode

    Select “No” to exit without formatting. Select “Yes” and press the SET button to begin the format. The memory card will be completely formatted. A message will appear confirming that your memory card has been formatted clean. Firmware Menu Use this menu to view the Firmware version on your camera or to reset your camera settings to the Factory Default Settings.
  • Page 29 Use the direction buttons to scroll and select the image you wish to view. Press the SET button to enlarge the image full size. Photo Playback Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Button Action...
  • Page 30 ViviLink Menu The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos to the social networks of your choice with the accompanying Vivitar Experience Image Manager application. Press the SET button to open the menus for the current mode.
  • Page 31 Press the SET button to select the desired option. selected option icon will appear on the selected item. An icon will appear on the image with the selected ViviLink destination site when you return to the Playback display. Remember that the ViviLink feature is deactivated by default. A ViviLink destination will only be assigned to a photo or video if you manually set it from this menu or from the ViviLink menu in Capture mode (accessible with the ViviLink Quick-Function button in Capture mode).
  • Page 32 Use the directional buttons to move the crop box to define the desired crop area. Use the W/T Zoom buttons on the camera to enlarge or shrink the crop box. When you are ready to crop, press the Shutter button. When you see the cropped picture appear, press the Shutter button again to save or press the SET button to cancel and return to the previous menu.
  • Page 33 You will be asked to connect the camera to the Pictbridge printer. Connect the USB cable provided in the package form the camera to the Pictbridge port of the printer. Once connected, follow the instructions on the printer to proceed with the printing process. Select the “Cancel”...
  • Page 34: Video Capture Mode

    Video Capture Mode The Video Capture Mode allows you to capture videos with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode. Press the MODE button once to access the Video Capture Mode.
  • Page 35 Video Capture Mode Menus The following are the menus that appear in your camera‟s Video Capture Mode:...
  • Page 36 Scene Menu The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current environment. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. Press the UP or DOWN direction control buttons to scroll through the menu options.
  • Page 37 Image Quality Menu The Image Quality menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. Press the SET button to open the menus for the current mode.
  • Page 38 White Balance Menu The White Balance feature allows your camera to adjust the coloring of the captured images depending on the type of light source in the current environment. Properly adjusting the White Balance setting to match your current environment will allow the camera to properly balance the colors in the images that are taken with your camera.
  • Page 39 Image Sharpness Menu You can set the level of sharpness in the images taken with your camera. The sharpness level dictates if the edges of objects in the image are more or less distinct. Press the SET button to open the menus for the current mode. Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
  • Page 40 Press the LEFT or RIGHT button to select the next menu item. Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection will display on the LCD screen. Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings.
  • Page 41 Multi – Used in standard conditions the camera divides and adjusts the settings of the image into several zones for light metering such as complex light conditions, position of subject, brightness, background, direct light and scenes Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure on the subject in the center of the monitor.
  • Page 42 Date/Time Menu When you capture an image with your camera, the image will include a time stamp with the date and time that the image was taken. The Date/Time menu allows you to set your camera‟s date and time as desired. You can also disable the timestamp for future images that will be taken with your camera.
  • Page 43 Auto Power Off Menu You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The designated time represents when your camera will automatically power off. When the camera sits idle for the designated period of time, the camera will shut off completely and will need to be turned on again with the power button before the next use.
  • Page 44 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Format Memory Card Menu You can use the Format Memory Card menu to delete all of the content that is currently on your camera‟s memory card.
  • Page 45: Video Playback Mode

    A message will appear indicating that the settings have been reset successfully. Video Playback Mode When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the MODE button twice to open the Playback Mode. The Playback Mode will allow you to review and edit photos and videos that you‟ve already taken with you camera.
  • Page 46 Video Playback Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Button Left Right Down Video Playback Mode Menus The following are the menus that appear in your camera‟s Video Playback Mode: Delete Menu While in the Playback mode, you can delete videos from your camera through the delete menu.
  • Page 47 ViviLink Menu The ViviLink technology allows you to quickly and easily upload your camera‟s photos and videos to the social networks of your choice with the accompanying Vivitar Experience Image Manager application. Press the SET button to open the menus for the current mode.
  • Page 48: Installing The Software

    Installing the Software You must be connected to the internet to install and run the Vivitar Experience Image Manager software. Insert the installation CD into your CD-ROM drive. The installation screen should automatically open. On PC: The Vivitar Experience Image Manager Installer window appears. If the window does not appear, open the application‟s CD/DVD drive and click on “Setup.exe”...
  • Page 49: Connecting The Camera To The Computer

    On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue. 10) On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the program will be installed, and then click “Install”.
  • Page 50: Getting Photos And Videos From Your Camera To Your Computer

    Getting Photos and Videos from your Camera to Your Computer An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. Select the “Get Images” button from the Main menu. The “Get Images from device”...
  • Page 51: Get Started

     Edit images using automatic and manual tools  Use automatic “Geotagging” with built in Google Maps For more details on how to use the Vivitar Experience Image Manager open the Help file or click the “Take the Tour” button on the application`s Home page.
  • Page 52: Transfer Media From My Camera To My Computer Manually (Using Macintosh)

    Camera Maintenance The digital camera is a delicate device. Please handle your camera with care to avoid damaging it. Do not expose your camera to heat sources. Do not use you camera in wet or moist conditions.
  • Page 53: Sakar Warranty Card

    Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase.
  • Page 54: Technical Support

    Technical Support For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and FAQ‟s at the website. Can‟t find what you are looking for? E-mail us at support@vivitar.com and one of our technical support team members will answer your questions.

Table of Contents