Powering The Camera On/Off; Powering The Camera On; Powering The Camera Off; Auto Off - Power Saving - Vivitar vivicam 090 User Manual

Powering the Camera On/Off

 Make sure the batteries (not included) have been inserted properly into your digital camera.
 Make sure the Micro SD card has been inserted properly into your digital camera.
Micro SD card up to 32GB - not included.
Please see Initial Camera Setup

POWERING THE CAMERA ON

Press the Power button to turn your camera ON.
After powering on, the LED light turns on briefly and the LCD screen turns on with your camera in
Photo Capture Mode.

POWERING THE CAMERA OFF

While the camera is on, you can press the
any point to turn your camera OFF.
AUTO OFF – POWER SAVING
Your digital camera also has an Auto Power Off feature that will automatically turn off your
camera after a specific period of time that your camera is left idle in order to save the battery
power. The Auto Power Off settings can be set from the 'Power Save' settings menu accessed
'Setup Menu' while in Photo Capture Mode or Video Capture Mode.
from the
for more information.
Power button down again for a few seconds at
12