Corrective Maintenance - Siemens 1LA8 Operating Instructions Manual

Maintenance

9.2 Corrective Maintenance

● Check the insulators, connectors and cable connections in the terminal box.
● Replace the damaged components if necessary.
9.2 Corrective Maintenance
Explosion hazard when carrying out repair work
Repairs are only permissible within the scope of the work described in these operating
instructions. Otherwise an explosion can occur in an explosive atmosphere. This can result
in death, serious injury or material damage.
For repairs to go beyond this scope, please contact the Service Center.
When carrying out any work on the machine, observe the general safety instructions
(Page 15) and the specifications contained in EN 50110‑1 regarding safe operation on
electrical equipment.
Comply with the IEC / EN 60079‑17 standard during all service and maintenance work on the
machine.
Note
If the motor has to be transported, please observe the information and instructions in the
"Transport" (Page 33) section.
9.2.1 Prepare servicing work
● The drawings and parts lists do not contain any detailed information about the type and
● Document the type, dimensions and arrangement of the parts so that you will be able to
112
WARNING
Short-circuit hazard
Damaged components can cause short circuits, possibly resulting in death, serious
injuries and property damage.
Replace damaged components.
WARNING
dimensions of fixing elements and components. For this reason, you should establish this
information when dismantling them and make a note of it for the purpose of reassembly.
reassemble the machine to its original state.
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 05/2014