Table of Contents
Advertisement
a 40-pin 0.1" pitch connector with signals from the PWM, ADC, and GPIO
peripheral ports. Table xxxxx below shows the Daughter Card Connector's
signal-to-pin assignments.
Figure 7-38: Motor Control Daughter Card Signal-To-Pin Assignments
8
TRK-MPC5604P CODE DEVELOPMENT SOFTWARE
The TRK-MPC5604P includes P&E's OSJTAG circuitry, so no external
Qorivva hardware tool is needed to debug and program the TRK-MPC5604P.
A user only needs to connect the TRK-MPC5604P to their PC to start
developing code for it.
The TRK-MPC5604P package comes with a special edition of Freescale's
CodeWarrior studio. In addition, P&E's evaluation software for Qorivva is
available in the TRK-MPC5604P Resources section of the TRK-MPC5604P
Resources CD, or online at www.pemicro.com. A user may use either
CodeWarrior or P&E software tools to develop code for the TRK-MPC5604P.
8.1
Using CodeWarrior With The TRK-MPC5604P
The CodeWarrior studio supports Freescale's Qorivva devices. It offers C,
C++, and assembly-level support, and provides debugging capabilities based
on P&E's debug and programming technologies.
TRK-MPC5604P EVB User Manual
27
Advertisement
Table of Contents
