Run Mode - P&E Microcomputer Systems TRK-MPC5604P User Manual

5.3

Run Mode

The TRK-MPC5604P's rich component list empowers it to perform a variety of
tasks. Once an application is developed, debugged, and programmed
properly into the microcontroller's internal flash memory, it can run with or
without connecting to a host.
5.4 External JTAG/Nexus Mode
The TRK-MPC5604P has an optional JTAG/Nexus header for debugging and
programming the on-board MPC5604P microcontroller using an external
Qorivva hardware tool, such as P&E's USB Multilink or Cyclone MAX. Please
refer to Section 9 - TRANSITIONING TO YOUR OWN TARGET for more
information. A user can take advantage of this mode to develop a target-
specific MPC5604P system and compare it with the TRK-MPC5604P when
necessary.
6 JUMPER SETTINGS
This section describes the various jumpers settings that are available on the
TRK-MPC5604P. Figures depict the default setting for each jumper.
6.1 System Power
The TRK-MPC5604P board provides 3 power options: SBC MC33905 or LDO
can regulate external power to 5VDC, or USB can provide 5VDC through
OSJTAG.
6.1.1 J1 - System Power
1-2 External Power 9VDC to 12VDC Regulated Down to 5VDC
3-4 USB OSJTAG Supplies 5VDC (default)
5-6 SBC MC33905 Supplies 5VDC
TRK-MPC5604P EVB User Manual 13