Adjust The Volume - Silvercrest SBW 60 A1 Operation And Safety Notes

Operation
Standby/ON
When you first connect the unit to the mains socket,
it will be in standby mode. The POWER indicator
will light up red.
Press the button on the unit or the remote control
to switch the main unit ON or OFF.
Disconnect the mains plug from the mains socket if
you want to switch the unit off completely.
Note:
• If a TV or an external device (Only for AUX
socket) is connected, the unit will switch on
automatically when the TV or the external
device is switched on.
• When turning the system on, the system will
continue in the mode it was in when it was last
turned off.
• If the unit is idle for over 15 minutes, the unit
will automatically switch to Standby mode.
Select modes
Press the AUX, OPTICAL, HDMI ARC and BT
(Bluetooth) buttons on the remote control to select
the desired mode.
• In AUX mode: the status indicator lights up
Green.
• In USB mode: the status indicator will flash
White.
• In Optical mode: the status indicator lights up
Orange.
• In Bluetooth mode: the status indicator lights
up Blue.
• In HDMI ARC mode: the status indicator
lights up White.

Adjust the volume

• Press the VOL+ / VOL- buttons on the unit or
on the remote control to adjust the volume.
38 GB/IE
• If you wish to turn the sound off, press the
MUTE button on the remote control. Press
the MUTE button again or press the VOL+
/ VOL- buttons on the unit or on the remote
control to resume normal listening.
• While adjusting the volume, the status indicator
flashes quickly.
• When the volume level reaches its maximum
level, if you press the VOL+ button again, the
status indicator flashes once. When the volume
level reaches its minimum level, if you press the
VOL- button again, the status indicator flashes
once.
Select a preset sound effect
While playing, press the EQ button on the unit or
the NEWS / MOVIE / MUSIC buttons on the
remote control to select from one of the following
preset equalisers:
• MOVIE (recommended for viewing movies
• Music (recommended for listening to music
• NEWS (recommended for listening to NEWS)
AUX / OPTICAL / HDMI ARC
Operation
1. Ensure that the unit is connected to the TV or
audio device.
Press the AUX / OPTICAL / HDMI ARC
2.
button on the remote control to select the
desired mode.
3. Operate your audio device directly for
playback features.
Press the VOL +/VOL– buttons to adjust the
4.
volume to your desired level.
Note:
While in OPTICAL/HDMI ARC mode, if there's
no sound output and the status indicator flashes
from the unit, you may need to activate PCM
Signal output on your source device (e.g. TV, DVD
or Blu-ray player).