Table of Contents
Advertisement
DCT5260_OM
10/1/02
5:31 PM
Symptom
Severe noise interference.
The Caller ID does not display.
You cannot register the
handset at the base .
The handset doesn't communicate • Remove the base ID (see "Replacing the base" on page 50) and
with the base or other handsets.
An extra handset can't join
the conversation.
If you still have a problem.
Page 55
• Keep the handset away from microwave ovens, computers,
remote control toys, wireless microphones, alarm systems, intercoms,
room monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your
Caller ID service is current.
• Charge the battery pack in the charge for 15-20 hours
• Remove the base ID (see "Replacing the base" on page 50).
place the handset in the base.
• Make sure that you have registered all handsets (DCX520 only).
• Only one handset at a time can talk with an outside caller (up to
2 handsets during 3 way conference).
• Call our customer hotline at 1-800-297-1023.
Suggestion
T R O U B L E S H O O T I N G
[ 55 ]
Advertisement
Table of Contents
