Navien UHA-744SG User Manual page 21

Setting CAMERA TYPE
■
* This is a mode that allows you to set the type of the door-phone camera to be connected with
the videophone.
* Set up as NTSC by default.
- Select [CAMERA TYPE] from [MANAGER] menu using the "UP" and "DOWN" buttons, and then
if you push the "SET" button, [CAMERA TYPE] menu appears, which indicates current setup.
- Select the type of the door-phone camera to be connected with the videophone using the
"UP" and "DOWN" buttons at the bottom and then push the "SET" button.
- You can see what was set in "CAMERA TYPE" on the screen.
- If you push the "EXIT" , using "UP","DOWN", the [MANAGER] menu screen will appear again.
※ Caution: The camera must be connected that matches the con guration setup.
If you fail to do this, (e.g., connecting PAL camera while set up as NTSC) the screen image
may not appear correctly. Then, the screen is returned to the normal state when the power is
OFF → ON
21