Navien UHA-744SG User Manual page 16

Setting the lead time (by the magnetic sensors only)
■
- It is the setting of the lead time for entering home and out from.
- The lead time should be set for entering and out time simultaneously.
- The lead time can be set in case the magnetic sensor is installed at the door only.
- Please enter the menu after pushing "SET" button at the stand by mode.
<Menu display of memory built in model>
- By push "+" or "-" button, please move to the ALARM DELAY menu and push "SET" button.
- At the manager mode, the following gures are popped up according to the installed position
of the magnetic sensor.
<In case of "NO USE">
<In case of "DOOR" setting>
- In case of "WINDOW" setting, the lead time is 0 Min. (No lead time for entering or out)
- In case of "DOOR" setting, the entering and out lead time can be set by 1 Min. 3 Min. or 5 Min.
- After the setting, if the user push "SET" button, it returns to the initial menu.
16
<Menu display out of memory>
<In case of "WINDOW" setting>
- In case of the "DOOR" position, the current lead
time is displayed as the selected lead time.