Alarm Function(By The Magnetic Sensors Only) - Navien UHA-744SG User Manual

Al a rm f u ncti o n(by the magneti c sensor s onl y )
Setting alarm
■
Please push Security button
more than 3 sec.
※ During the lead time, there is no alarm even an abnormal signal was detected.
※ If the window or door are not closed which have the magnetic sensor, it should
be not possible to set the alarm function.
Releasing alarm
■
During the alarm activation, if the user presses Security button more than 3 sec, the alarm
mode is released automatically.
Sensing the intrusion
■
1) In case of sensing the intrusion
- If the intrusion signal is detected from the door which has the magnetic sensor, the lead
time alarm sound should go out during the preset lead time. After the lead time, the
intrusion signal is detected and the emergency alarm sounds out.
- In case of the magnetic sensor is installed at the window, if an abnormal intrusion is
sensing, the emergency alarm is activated immediately and the alarm sounds out.
2) Releasing the alarm
- During the alarm sounds out, if the user push the Security button more than 3 sec,
the alarm is deactivated and the emergency mode is released.
※ In case of the alarm function, it doesn't work if the user didn't set the installation position at
the manager mode. In addition, after the install the magnetic sensor, please preset the alarm
setting after close the window or door de nitely.
During the preset lead time,
a lead time alarm sounds out.
After the lead time, alarm is
activated.
13