Table of Contents
Advertisement
Quick Links
DIGITAL COLOR LCD HANDS FREE
VIDEO PHONE
UHA-744SG/M
• Please carefully read this User's Guide (In particular,
precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents
caused by abnormal operation of the product.
Advertisement
Table of Contents
Related Manuals for Navien UHA-744SG
Summary of Contents for Navien UHA-744SG
- Page 1 DIGITAL COLOR LCD HANDS FREE VIDEO PHONE UHA-744SG/M • Please carefully read this User’s Guide (In particular, precautions for safety) before using a product and follow instructions to use a product exactly. • The company is not responsible for any safety accidents...
- Page 3 Warning and important safeguards Components Installation Product speci cations Operation Alarm function(by the magnetic sensors only) Manager mode(Video memory equipped model) Menu setting functions Wiring diagram Warranty...
- Page 4 WARNI N G • To prevent injury, the following safety precaution should be observed during installation, use and servicing of the unit. CAUTION RISK OF ELECTRIC SHOCKS DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of...
- Page 5 For the customers This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
- Page 6 I m port a nt Saf e guar d s 1. Read Instructions All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3.
- Page 7 10. Grounding and Polarization This unit may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will t into the power outlet only one way.
-
Page 8: Components
COMPONENTS Main body ■ ⑨ ② ⑫ ③ ⑩ ⑪ ④ ⑦ ⑤ ⑥ ⑧ Mi c Guar d phone But t o n Connect i o n t e rmi n al f o r Lobby phone LCD Scr e en Speaker Connect i o n t e rmi n al f o r Door camer a... -
Page 9: Installation
I N STALLATI O N Standard height of video phone ■ 1,450mm from the oor is suggested for locations of monitor and camera. <Caution> Install the monitor away from the heat, moisture and direct sun rays. - Page 10 7" Color TFT LCD Screen Video 1Vp-p/75Ω, Composite input NTSC/PAL(Color) Temp. 0℃∼40℃ Environmental Circumstance Humidity Less than 90% (Relative humidity) Size 202 (W) × 142 (H) × 32 (D) mm Dimensions UHA-744SG : 792g Weight UHA-744SGM : 815g Mounting Wall surface mounted...
-
Page 11: Operation
OPERATI O N When a visitor pushes the Call Button ■ (the door phone at the front door, or Lobby phone) When a visitor pushes the Call Button on the door-phone at the front door, or Lobby phone The call is transferred to the Videophone. Call signal is ringing on When Talk button is If you press the “Talk”... - Page 12 Call signaling from the Guard phone ■ After the appearance of When the “Talk” Button If you press the Talk “GUARD” on the screen, is pressed, the conversation Button while talking with call signal is ringing on with the Guardphone starts. the Guard phone or the time the Videophone, limit of 1 minute is reached,...
-
Page 13: Alarm Function(By The Magnetic Sensors Only)
Al a rm f u ncti o n(by the magneti c sensor s onl y ) Setting alarm ■ Please push Security button During the preset lead time, more than 3 sec. a lead time alarm sounds out. After the lead time, alarm is activated. -
Page 14: Manager Mode(Video Memory Equipped Model)
MANAGER MODE (Vi d eo memory equi p ped model ) Storing images of visitors * Storing, identifying and deleting images of visitors. Storing images - Storing of images is done automatically during call signaling to the door-phone, depending on how the user has set up STILL/VIDEO storing in the user menu. - If there’s no storage space, it overwrites to make the new capacity of recording. -
Page 15: Menu Setting Functions
Menu setti n g f u ncti o ns How to control the call signal bell ■ - You can control the call signal bell volume the “+” or “-” switch located on the side of the product when in-bound or out-bound calling. - Using “+”... - Page 16 Setting the lead time (by the magnetic sensors only) ■ - It is the setting of the lead time for entering home and out from. - The lead time should be set for entering and out time simultaneously. - The lead time can be set in case the magnetic sensor is installed at the door only. - Please enter the menu after pushing “SET”...
-
Page 17: Time Set
Additional functions (Video memory equipped model) ■ [TIME SET] : YEAR : MONTH : DATE : HOUR : MINUTE Setting of the year - When the “SET” button(on the right) is pushed from the standby screen, the User menu screen appears. - If you select “TIME”... - Page 18 User menu (Video memory equipped model) ■ [SAVE] STILL VIDEO * Video storage type setup mode - If you push the “SET” (on the right) button from the standby screen, the User menu screen appears. - Select “SAVE” on the menu screen pushing the “UP” and “DOWN” buttons on the right, and push the “SET”...
- Page 19 Manager mode is the product setting mode that allows a installer to con gure the device environment(setting phone ID, the type of door phone camera and magnetic sensor position ) needed for operation. While you are in Manager mode, you will not receive any door-phone, lobby phone or guard phone call. ※...
- Page 20 PHONE ID setting. ■ It’s the mode to set the related information such as APT building and other information to communicate with the main controller etc.. The initial default is APT building with 0101 and at number with 0101. - At [MANAGER] menu, by using “+” and “-” button, the user can select [PHONE ID] and push “SET”...
- Page 21 Setting CAMERA TYPE ■ * This is a mode that allows you to set the type of the door-phone camera to be connected with the videophone. * Set up as NTSC by default. - Select [CAMERA TYPE] from [MANAGER] menu using the “UP” and “DOWN” buttons, and then if you push the “SET”...
- Page 22 Setting the position of the magnetic sensor ■ ( by the magnetic sensors only ) * It sets the position of the magnetic sensor. * The initial mode is “NO USE”. * In case of NO USE, the alarm function isn’t available. - In the [MANAGER] menu, please select [SENSOR LOCATION] by “+”, “-”...
-
Page 23: Wiring Diagram
WI R I N G DI A GRAM System Wiring ■ DOOR CAMERA LOBBY PHONE MAIN CONTROLLER MAGNETIC SENSORS AC/DC STRIKER GUARD PHONE... - Page 24 Wiring Diagram ■ M/C, Lobby (data, voice) Lobby(video) (1) POWER Door (2) VOICE Camera (3) VIDEO (4) GND +14V POWER (OUTPUT) Magnetic AC/DC Sensors Door Striker Door Camera Wiring ■ MONITOR CAMERA POWER POWER CAM1 VOICE VOICE UTP CABLE VIDEO VIDEO CAM2 If UTP CABLE[CAT.5] is used, use 5th lines for GND line...
-
Page 25: Warranty
WARRANTY Products are supplied with two(2) years return to base warranty from the date of purchase. We will repair or replace the defective item with a new or factory rebuilt replacement. Condition 1.This warranty applies to the original purchaser only. 2. - Page 26 memo...
- Page 27 memo...
- Page 28 memo...
- Page 29 memo...
- Page 30 memo...
- Page 32 4F, KOAMI Bldg., 22,Gukhoe-daero 76-gil,Yeongdeungpo-gu,Seoul, 150-870, Korea/KD One global business Dept. Website : www.kdone.co.kr...