Quick Setup Menu - Printronix SL5000r Quick Setup Manual

QUICK SETUP Menu

QUICK SETUP Menu
QUICK SETUP
Print Intensity
–3*
Print Speed
6 ips*
2
Print Mode
Transfer*
Media Handling
Tear-Off Strip*
Paper Feed Shift
0.00 inches*
Label Length
4 or 6 inches*
Label Width
4.1, 6.6, or 8.5 inches*
Ver Image Shift
0.00 inches*
Hor Image Shift
0.00 inches*
Orientation
Portrait*
Gap/Mark Sensor
Disable*
Auto Calibrate
Run Calibrate
(cont. on next page)
38
–15 to 15
1
1 to 10 ips
Direct
Tear-Off Peel-Off
3 4
–0.50 to X inches
3, 5
00.1 to 99.0 inches
3, 5
00.1 to 8.5 inches
3 4
–1.00 to X inches
3
–1.00 to 1.00 inches
Landscape Inv. Portrait
Mark Gap
Notes:
* = Default
1
Maximum value depends on the width of the
printer model and printhead.
2
Does not appear for direct thermal only printers.
3
You can change the unit value from inches to
millimeters under Units (in MEDIA CONTROL)
See the User's Manual for information.
4
Based on the current value setting for the Label
Length menu, up to a maximum of 12.80 inches.
5
Maximum value depends on the width of the
printer model.
6
Maximum value depends on model width and size
of DRAM installed.
Cut Continuous
6
5
Inv. Landscape
Advanced Gap Advanced Notch