Technician Setup - Andrew Node C837 User Manual

4.2.4.3

Technician Setup

Description
Filter Selection
Filter Power to Total Power Ratio
Downlink Power
Downlink Gain
Relative Uplink Gain
Absolute Uplink Gain
Downlink DCM path
Uplink DCM path *
Downlink PA
Uplink PA
Complete Network Element
Interference Cancellation
* In the Uplink DCM path it is possible to enable or disable the primary and diversity paths
individually.
Page 64
User's Manual for Node C Network Elements
figure 4-7 Technician Setup menu
Explanation
Select the frequency range for channel 1, 2 and
3; for filter setting refer to chapter 5.2.1 Filters.
Enter ratio of pilot power to total power
(depending on base station).
Select Power mode or Gain mode and set the
desired power or gain, respectively.
Select Relative or Absolute Uplink Gain mode
and set the respective value.
Enable or disable the respective feature.
PRELIMINARY M0121A1A_uc.doc