Pole Mounting Procedures - Andrew Node C837 User Manual

3 Installation
3.1.4

Pole Mounting Procedures

The following figure illustrates the two pole mounting options:
back-to-back (left) and two systems (right).
• Before starting the mounting procedure, check the pole diameter of the pole to
which the units will be installed; then, cut the thread-bolts (see table 3-3
Components of pole mounting kits, pos. 5) to the required length according to the
following table, which also states the appropriate cable bridge lengths:
Pole-diameter
(mm)
Length of Thread-
Bolt (mm)
Length of cable
bridge (mm)
(back-to-back)
Length of cable
bridge (mm)
(for 2 systems)
table 3-2 Required length of thread-bolts and cable bridge
ID No: 161692
figure 3-5 Pole mounted systems
100 110 120 130 140 150 160 170 180 190 200
216 226 236 246 256 266 276 286 296 306 317
800
PRELIMINARY
800 2000
2000
Page 17