Glossary Of Terms - Printekmobile Mobile Thermal Printer MtP400 Operator's Manual

Mobile thermal printer
Hide thumbs Also See for Mobile Thermal Printer MtP400:
Table of Contents

Advertisement

802.11
access point
Ad-Hoc
ASCII
authentication
bandwidth
baud rate
binary
bit
Bluetooth
client
control code
character pitch
cpi
current line
current print position
default
DHCP
dpi
escape sequence
font
hexadecimal
IEEE
infrastructure
interface

Glossary of Terms

Wireless networking communication standards created by IEEE.
An interface between a wireless network and a wired network.
A Wi-Fi network consisting of only stations (no access point). Same as Peer-
to-Peer.
American Standard Code for Information Interchange.
The process a Wi-Fi station uses to identify itself to another station.
The amount of data that be transferred in a given period of time.
The rate at which characters are transmitted over a serial interface. This is also
often referred to as bits per second.
Base two numbering system. Digits are represented by the characters 0 and 1.
A single binary digit.
A definition for short range radio frequency communications.
Any node on a network that requests services from another node (server).
A single, non-printing character which is used to control the configuration or
operation of the printer.
The horizontal spacing of characters. Measured in cpi.
Characters per inch.
The line upon which the next character will be printed.
The column on the current line where the next character will be printed.
Value or configuration assumed when the printer is powered on or reset.
Dynamic Host Configuration Protocol. A method used to centrally control the
assignment of IP addresses on a network.
Dots per inch. Generally used to refer to graphics density or resolution.
String of characters beginning with the escape (ESC) character which is used
to control the configuration or operation of the printer. The characters which
are part of this string are not printed.
A group of characters of a given shape or style.
Base sixteen numbering system. Digits are represented by the characters 0
through 9 and a through f.
Institute of Electrical and Electronic Engineers
A Wi-Fi network consisting of stations connecting to a wired network or other
stations via an access point.
The connection between the printer and the host computer.
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtp400 series

Table of Contents