Table of Contents
Advertisement
Printer Configuration
IP Subnet Mask
Possible Values: 0.0.0.0*, User specified
This feature specifies the range of addresses, or the size of the network, that the printer's IP address belongs to.
Note that this feature has no effect if IP Address Method is not set to "Static".
IP Gateway
Possible Values: 0.0.0.0*, User specified
This feature specifies the network node where data destined for a node outside of the LAN should be directed.
Note that this feature has no effect if IP Address Method is not set to "Static".
Tunnel Port Number
Possible Values: 00000 ... 08023* ... 65384
This feature specifies the TCP/IP port to be used for data that is to be printed..
To advance through the character positions, press the
position, press the
Increment Button.
Note: This feature is available in printers with firmware revision 2.0 and higher.
OPTIONS MENU
The OPTIONS MENU contains features that affect how the printer operates regardless of how features in other
menus have been set.
After entering Setup as described earlier in "Setup Basics", press the
MENU" is displayed on the top line. You may now do one of the following:
press the
Enter Button to review and/or change the features available, or
press the
Advance Button to advance to the TEST MENU
Pressing the
Enter Button will advance through the following features in the order shown below.
30
IP Subnet Mask
0.0.0.0
IP Gateway
0.0.0.0
Tunnel Port#
08023
Advance Button. To change the character at the current
Options Menu
Advance Button until "OPTIONS
Advertisement
Table of Contents
Troubleshooting
