Wi-Fi Interface - Printekmobile Mobile Thermal Printer MtP400 Operator's Manual

Local Name
Possible Values: MtP400-aaannnnn*,
Up to 16 characters of "0" through "9", "A" through "Z", "a" through "z", "-", "_", SPACE
This feature sets the name that will be displayed by most host systems when "discovering" the printer. When
shipped from the factory, the default value for the Bluetooth Local Name is "MtP400-aaannnnn" where
"aaannnnn" is the printer's serial number. This name may be changed to any combination of letters, numbers,
dashes, underscores, and SPACEs. The name may be up to 16 characters in length.
To advance through the character positions of the name, press the
at the current position, press the
"0123456789 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz - _ SPACE".
Address
Possible Values: Twelve digit hexadecimal string.
This feature displays the unique hardware value associated with the particular Bluetooth interface installed in
the printer. This value is set by the hardware manufacturer, is guaranteed to be unique for each interface, and
may not be changed.

Wi-Fi Interface

INTERFACE MENU
Wi-Fi
Note that "Wi-Fi" must be displayed on the bottom line of the display in order to access the following features
and for this interface to be active when Setup is exited.
Emulation
Possible Values: Printek*, O'Neil, ZPL-II, Mt3, CPCL, Hex Dump
This feature sets the family of printer commands that may be used by a host application program to control the
various capabilities of the printer. The printer will only respond to commands valid for the currently selected
emulation. For more information, please refer to the MtP400 Series Programmer's Manual.
Note: After pressing the
and display "Waiting for Wi-Fi" while reading the current configuration from the Bluetooth interface
module.
Local Name
MtP400-AAANNNNN
Increment Button. The order of characters that may be selected is
Address
0080371B8F32
Emulation
Printek
Enter Button to move from Emulation to WLAN Type, the printer will pause
Printer Configuration
Advance Button. To change the character
27