Printekmobile Mobile Thermal Printer MtP400 Operator's Manual page 25

Font
Possible Values: 4.2 cpi SnsSrfA
5.5 cpi SnsSrfA
10.2 cpi SnsSrfA
10.7 cpi SnsSrfA
12.7 cpi Courier
13.5 cpi Courier
14.5 cpi Courier
15.6 cpi Courier
Any downloaded fonts will also be displayed.
This feature selects the default font and character pitch.
Spacing
Possible Values: 0 ... 3* ... 10 Lines
When printing text, this feature sets spacing between lines. The height of a complete line, or line pitch, is
determined by adding the vertical size of the current font to the Spacing. With Spacing set to the default value
of "3" and using a font that is 23 rows high, the line pitch would be 3 + 23, or 26 dot rows. Since each dot row
is 0.125mm, 26 x 0.125 yields a line pitch of 3.25mm. or 7.8 lines per inch This line pitch value also
determines the amount of paper motion performed when an ASCII Line Feed character is received by the
printer.
When printing PC Line drawing characters, Spacing should be set to "0" to avoid space between rows of
characters used to draw vertical lines.
When printing graphic data, Spacing has no affect so that multiple lines of graphics may print adjacent to each
other.
Left Margin
Possible Values: 0.0000"* ... 1.0244" in increments of 0.0394"
This feature sets the left margin in inches relative to the leftmost printing position. The left margin must be less
than the right margin.
Font
16.9 cpi Courier
16.9 cpi SnsSrfA
16.9 cpi Courier*
18.5 cpi SnsSrfA
18.5 cpi Courier
20.3 cpi SnsSrfA
20.3 cpi Courier
22.6 cpi Courier
25.4 cpi Courier
Spacing
3 Lines
Left Margin
0.0000"
Printer Configuration
19