Printek FormsPro 4300 Operation Manual page 55

Function
Interface:
Options:
Clone:
Possible Values
Edit*, View, or Init
Edit*, View, or Init
Off*, Transmit, Receive
Advanced Control Panel Features
Description
Selects whether an operator can
modify, only look at, or initialize
function values in the interface
menu.
Edit allows the operator to look at
and/or modify interface function
values.
View allows the operator to only
look at the interface function values.
No values can be modified.
Init causes all interface function
values to be set to the factory
default settings. When this
completes, the security value is set
to Edit.
Selects whether an operator can
modify, only look at, or initialize
function values in the options menu.
Edit allows the operator to look at
and/or modify option function
values.
View allows the operator to only
look at option function values. No
values can be modifed.
Init causes all option function values
to be set to the factory default
settings. When this completes, the
security value is set to Edit.
Used for cloning setup information
to or from a printer. For more
information, see the appendix on
"Cloning Printer Setup".
Page A-5