Printek FormsPro 4300 Operation Manual page 98

Printer Specifications
RELIABILITY
No electronic adjustments. Unit automatically measures and sets operating parameters each
time unit is powered on.
Print head has forced air cooling.
MTBF 10,000 hours on electronics with no duty cycle limitation.
Print head life of 300,000,000 draft equivalent characters on FormsPro 4300 or 500,000,000
draft equivalent characters on FormsPro 4500 and FormsPro 4503. Printer life excluding
print head of 1,000,000 pages.
Warranty:
Printer: One year limited warranty for defects in materials and/or workmanship.
Print Head: FormsPro 4300 - 300 million draft equivalent character life.
FormsPro 4500 and FormsPro 4503 - 500 million draft equivalent character life.
One year limited warranty for defects in materials and/or workmanship. Print head
warranty may be extended to a two year limited warranty with the use of Printek brand
ribbons.
ENVIRONMENTAL SPECIFICATIONS
Power requirements: 120 VAC 10%, 60Hz.
Power consumption: FormsPro 4300 - 60 W non-printing, 200 W printing.
FormsPro 4500 and FormsPro 4503 - 60 W non-printing, 225 W printing.
Audible noise: <65 dBA, cooling fan automatically switches to low speed when not printing.
Operating Temperature: 50 degrees F to 95 degrees F.
Relative Humidity: 20% to 80% non-condensing.
Physical Size: 9.5" High x 25" Wide x 20.3" Deep.
Weight: FormsPro 4300 and FormsPro 4500 - 53 lbs (61 lbs shipping);
FormsPro 4503 - 60 lbs (68 lbs shipping).
OPTIONS
Additional 24,576 (24K) character input buffer.
RS-422 serial interface.
Coaxial/Twinaxial interface (includes RS-232 serial and standard parallel).
Imager or ImagerPlus Bar Code support.
Paper Cutter.
Print Stand.
** May be emulation dependent.
*** Only included in units with the coaxial/twinaxial interface.
Page I-4