Lnb Oscillator Frequency - Triax CGS 470 Assembly Instruction Manual

• Using buttons
For Channel strips "B" and "C": "TUNER Line A" or "TUNER Line D",
For Channel strip "D": "TUNER Line D" or "TUNER Line A CA"
• Press the
lnb
os C i l l ato r
• Using the
frequency to be set.
• Use the
• Press the
select the tuner:
button.
Channel strip A / Channel D with setting "Tuner Line D":
—> The "LNB oscillator frequency" – "LNB" menu is activated.
Channel strip B or C / Channel strip D with setting "Tuner Line A CA":
—> The "Station filter" menu is activated (page 20).
f r e q u e n C y
—> This menu is only displayed in channel strip A / channel strip D with
setting "Tuner Line D".
Bx 1A LNB
10600 MHz >
buttons, move the cursor under the digit of the oscillator
buttons to set the oscillator frequency of the LNB being used .
button.
—> This menu is only displayed in channel strip A if a CA modul is in use.
—> The "CA module, card information" – "MENU" is activated.
*)
—> The information shown in the display is dependent on the CA
module used.
Bx 1A
Information *)
- 17 -
MENU 1/6
CGS 470