Selecting The Module / Channel Strip - Triax CGS 470 Assembly Instruction Manual

5.3 p
r o g r a m m i n g
Notes:
– Entries are saved by pressing the
– The programming process can be cancelled by pressing and holding the
button.
• Switch on the head-end station.
t h e d i g i ta l m o d u l e
—> You will be returned to "Selecting the module/channel strip".
—> You will be returned to "Selecting the module/channel strip".
—> The display shows "SETUP BE160" and the software version of the
head-end station (e.g. V 10).
—> The output level of the output collector can be adjusted in the "SET-
UP" menu (see CSE 2800 assembly instructions).
SETUP
button.
Ein/On
BE160
V 10
- 15 - CGS 470