Menu Items - Triax CGS 470 Assembly Instruction Manual

4 t
h e C o n t r o l
4.1 m
e n u
Program the module using the buttons on the head-end station control unit. The
menus appear on the two-line display of the control unit.
The parameters and functions to be set are underlined.
You can use the
– LNB oscillator frequency
– Tuner selection (channel strips "B", "C" and "D" only)
– Symbol rate
– Input frequency
– Station filter
– Audio stream selection
– Audio output level
– Stereo decoding / audio type selection
– Picture format signal (WSS)
– Test lines
– Teletext subtitle page
– Store
4.2 f
u n C t i o n s
p a n e l a t
i t e m s
button to select the following menu items:
o f t h e C o n t r o l
– To move the cursor
– To adjust values and functions
– To store the programmed data
– To switch to the next menu
a g l a n C e
pa n e l b u t to n s
S
- 11 -
M
CGS 470