TDX Headend System Main Unit
Black Edition
If you want to distribute EIT information in connection with your IP output, you can choose between:
distributing EIT information with every single IP service, or
use a barker channel for carrying all EIT information for the IP output.
The EIT barker channel can be output in two ways depending on how you distribute your IP output:
IP output method
IP output is distributed through the Link
sockets.
IP output is distributed through an IP
output module.
EIT – every IP service
1.
Select the Network tab in the Service Tool.
2.
Open the EIT drop-down list.
3.
Select "Full Actual – No other".
4.
Press the Submit button.
5.
Press the Apply button.
EIT – barker channel
Barker channel distribution method
EIT barker channel is output through Link 2 on the
main unit
EIT barker channel is output through the AUX
socket on the first IP output module in the
headend system
35
EN