Insert An Sd Card - Kyocera Dura Force PRO User Manual

Hide thumbs Also See for Dura Force PRO:
Table of Contents

Advertisement

SD Card
Your phone supports the use of an optional SD card (not included) to expand its storage capacity. It
supports cards up to 256 GB. Some cards may not operate properly with your phone.
Note: You can easily damage the microSD card by improper operation. Please be careful when inserting,
removing, or handling it.
SD Card Cautions
Data: Information stored on SD card can become lost or changed accidentally as a result of damage.
It is recommended that you keep a separate copy of important data.
damages from data that is lost or changed.
Reading/Writing Data: Never power off while reading or writing data.
Battery Level: A low battery charge may prevent reading/writing to SD card.
Handling SD Card: Use/store SD cards away from the reach of infants. May cause choking if
swallowed.

Insert an SD Card

Follow these steps to insert an optional SD card (not included). Make sure to power your phone off before
inserting or removing an SD card.
1. If your phone is on, turn it off.
2. Remove the back cover by inserting your fingernail in the slit on the bottom of your phone and
pulling away from the phone.
3. Open the SIM/microSD slot cover and insert an SD card into the slot on the right with the gold
terminals facing down. Gently push the card into the slot until it snaps into place.
Set Up Your Phone
is not responsible for
10

Advertisement

Table of Contents
loading

Table of Contents