Fujitsu AU*A12LALN Service Instruction page 122

1-4. Setting the Cooler Room Temperature Correction
Depending on the installed environment, the room temperature sensor may require a correction.
The settings may be selected as shown in the table below.
Setting Description
Standard
Lower control
1-5. Setting the Heater Room Temperature Correction
Depending on the installed environment, the room temperature sensor may require a correction.
The settings may be changed as shown in the table below.
Setting Description
Standard
Lower control
Slightly warmer control
Warmer control
1-6. Setting Other Functions
The following settings are also possible, depending on the operating conditions.
Auto Restart
Setting Description
Yes
No
Indoor Room Temperature Sensor Switching Function
(Only for Wired remote controller)
Setting Description
No
Yes
If setting value is "00",
room temperature is controlled by the indoor unit temperature sensor.
If setting value is "01",
room temperature is controlled by either indoor unit temperature sensor
or remote control unit sensor.
(
Function Number Setting Value
30
(
Function Number Setting Value
31
(
Function Number
40
(
Function Number
42
08-13
Factory setting)
00
01
Factory setting)
00
01
02
03
Factory setting)
Setting Value
00
01
Factory setting)
Setting Value
00
01