Tenda F9 User Manual page 9

LED Indicator
WAN
The LED indicator is reserved.
Port & Button
Port & Button
WAN
1/2/3
WiFi
RST
PWR
Status Description
Off The LAN port is not connected, or not connected properly.
Solid on The WAN port is connected properly.
Blinking The WAN port is transmitting or receiving data.
Off The WAN port is not connected, or not connected properly.
WAN 1/2/3
Description
It's used to connect to an Ethernet cable with internet connectivity.
It's used to connect to a wired device, such as a computer and so on.
Press it to enable/disable WiFi feature.
Hold it down for 8 seconds until all LEDs light up for once to restore to factory settings.
It's used to connect to the included power adapter for power supply.
PWR
RST
WiFi