Tenda F9 User Manual page 62

Method 1
Configuration Procedure
Step 1 Connect the computer to the router.
Step 2 Log in to the router web UI.
Step 3 Choose Administration to enter the page.
Step 4 Set Clone MAC Address to Clone Local Host MAC.
Step 5 Click OK to apply the settings.
---End
Method 2
Configuration Procedure
Step 1 Connect another device (such as a smart phone or tablet) to the router.
Step 2 Log in to the router web UI.
Step 3 Choose Administration to enter the page.
Step 4 Set Clone MAC Address to Manual.
Step 5 Enter the MAC address of the computer that can access the internet in the format of xx:xx:xx:xx:xx:xx.
Step 6 Click OK to apply the settings.
---End
The Restore Default MAC is the default MAC address of the router. If you do not need to use the Clone MAC
function, keep the default settings.
WAN Speed
It specifies the throughput of the WAN port. By default, the throughput of the WAN port is set to 100M Full