Tenda F9 User Manual page 64

---End
Verification
Verify that you can access the router web UI at 192.168.5.1 or tendawifi.com.
After the settings take effect, the system displays the login page at the new LAN IP address. After you log in to
the router web UI, the system displays the updated LAN IP address range of the router on the LAN Parameters
page. See the following figure. The LAN IP address is changed to 192.168.5.1 and the IP address range is changed
to 192.168.5.100~200. That is, the router assigns only the IP addresses within this range to devices connected to
the router.
Enabling or Disabling the DHCP Server
The default setting is recommended. If you need to change the settings, refer to the parameters in the following
table.