Tenda F9 User Manual page 67

The following diagram is for reference.
The computer used to remotely log in to the router web UI must be assigned a public IP address. If it is
assigned a private IP address, use the public IP address of the router to which the computer connects
for remote login. Private IP addresses are not applicable to remote management.
Configuration Procedure
Step 1 Choose Administration > Remote Web-based Management to enter the page.
Step 2 Select the Enable.
Step 3 Set Management IP Address to Specific, and enter the WAN IP address (public IP address) of the
computer where remote management is to be performed. In this example, set it to the WAN IP address
of computer 2, which is 218.88.93.33. If you are uncertain about the IP address of the computer, set
Management IP Address to All (default value). In this case, all computers can log in to the router web
UI over the internet.
Step 4 Set Port to the port number of the web server, which is generally 8080. You can also select a port
number from 1024~65535, but the port number must not be the same as that for Port Forwarding.
Step 5 Click OK to apply the settings.