I V .
A S S E M B L Y
Quick Release Fasteners: The seat is secured to the seat
CLAMPED
UNCLAMPED
post with a quick release fastener. The quick release fas-
tener consists of a bolt, a lever, and a nut. See figure 12.
LEVER (FULLY CLOSED)
The lever has a cam on the end that allows it to clamp into
NUT
BOLT
place. The quick release fastener has two states: clamped
and unclamped. When the lever is open, the quick release
fastener is unclamped. When the lever is closed, the quick
LEVER (OPEN)
release fastener is clamped.
CAM
To clamp the quick release fastener:
1. Make sure the lever is in the open position.
2. Turn the nut clockwise until it is snug.
Figure 12. Quick Release Fastener Operation
3. Rotate the lever until it is in the fully closed position.
NOTE: If the lever will not rotate to the fully closed
position, then turn the nut counterclockwise one-
quarter or one-half turn.
24
www.pridemobility.com
Jazzy Select Series