Honeywell Touchpoint Plus Technical Handbook page 19

Safety Hazards, Warnings And Cautions
Product Compliance
This product complies with the following standards and directives.
Other safety directives may apply to the complete system installation if an OEM's product is integrated into other
equipment or machinery.
Hazardous Location
(Non-Incendive)
Electrical Safety
EMC/RFI
Low Voltage Directive
Gas Performance*
* ISA 12.13.01 and CSA C22.2 No.152 approvals are applicable only to mV sensors Model 705 and MPD or any suitably
certified mA sensor.
Note: The Equipment referred to in this manual contains components and assemblies that are each certified for use in a
variety of differing environments, and it is the site owner's responsibility to confirm the suitability of the equipment prior to
its installation and use.
Please check the product rating plate and look for the following marks to ensure that the supplied equipment is
suitable for its intended location and purpose:
Products bearing the CE mark conform to all applicable European Directives as stated on the Honeywell product specific
EC Declaration of Conformity.
Products bearing the UL mark conform to the requirements for Ordinary Locations. The letters C and US mean that the
product is certified for use in Canada and the United States of America.
Read and understand the instruction manual before operating or servicing the equipment.
MAN0984_Iss 3_02/16
Pt. No. 3011M5001_3
Safety
Class 1, Division 2, Groups A,B,C,D, Temp. Code T4
ISA 12.12.01-2013
CSA C22.2 No. 213-M1987
CAN/CSA C22.2 No. 61010-1 and No.142
UL 61010–1 (3
IEC/EN 61010–1 (3
EN 50270
IEC/EN 61010–1 (3
ISA 12.13.01 and CSA C22.2 No. 152
Compliance
rd
Edition); UL508
rd
Edition)
rd
Edition)
IMPORTANT
11
Touchpoint Plus
Technical Handbook