Ma Output Module - Honeywell Touchpoint Plus Technical Handbook

12.3.4 mA Output Module

Description
Module Power Consumption (Max.)
Sensor Configuration
Signal Measurement Range
Loop Resistance
12.3.5 Relay Output Module
Description
Power Consumption Maximum
Relay Contacts (~ / — )
Relay Operation
12.3.6 Expansion Module
Cable between Basic and Expansion units
12.4 Power Supplies
12.4.1 External Supplies
SMPS Power Supply
AC Input Voltage Range (~)
DC Input Voltage Range ( — )
Input Frequency Range (~)
Output Voltage ( — )
Dimension
MAN0984_Iss 3_02/16
Pt. No. 3011M5001_3
Technical Specifications
4-channel Analogue Output Module for 2 wire 4 – 20 mA
signals
3 W (700 mA loop resistance @ 20 mA output)
2-wire current source, Isolated current loop output
0 – 20 mA (4 – 20 mA = 0 – 100% scale)
33 – 700 Ω
12-channel Relay Output Module incorporating 12 single pole
change over (SPDT) relays
2.6 W (with all relays energised)
1.7 A @ 250 VAC / 1.7 A @ 30 VDC
Individually configurable for – normally energised / de-
energised operation
<10 m, 18 – 20 AWG, shielded twisted pair
156 W
AC 110/220 V ±10 % of nominal (manual switching)
DC 18 – 32 V SELV Supply
AC 50 – 60 Hz ± 6 %
DC 24 V
199 x 98 x 38mm (L x W x H)
121
Touchpoint Plus
Technical Handbook