Input/Output tab
Click the
tab (see figure 26,
Input/Output
contains input information and HDCP authorization options.
Figure 26.
Input/Output Tab
Input Name— Displays the input name.
2
Signal Type — Displays the signal type of each input. Input 1 is
3
are
.
HDMI/DVI
HDCP Authorized — Select either
4
report as an HDCP authorized device. If the box is not checked, the source is blocked
from encrypting its output. This may result in some content not being passed by the
source device.
NOTE: HDCP authorization is for inputs 2 and 3 only.
XTP T USW 103 Switcher • XTP System Configuration Software
) to open the
1
Input/Output
check box to have the input
HDCP Authorized
screen. It
. Inputs 2 and 3
analog
30