By default, audio input is selected automatically (see
commands on page 19 to manually select audio inputs). When input 2 or 3 is
selected with automatic audio input selections, the switcher prioritizes embedded digital
audio. The table below shows the audio format that is sent over the XTP connection
when a specific audio format is not specified.
Selected
HDMI Embedded
Video Input
Audio Present
VGA
VGA
HDMI
HDMI
HDMI
HDMI
Analog video input connector — Connect a video source to the 15-pin HD
B
connector, labeled input 1 (see
video signals.
HDMI input connectors — Connect a digital video source device to either or both
C
female HDMI connectors, labeled inputs 2 and 3 (see
page). They accept HDMI, DVI (with an appropriate adapter), or dual mode DisplayPort
video sources.
NOTES:
•
For HDMI cables, the maximum cable length is 15 feet (4.6 meters).
•
Use Extron LockIt Cable Lacing Brackets to secure HDMI connectors to the
device (see
HDMI Connection
Analog Audio
Present
N/A
Yes
N/A
No
Yes
No
Yes
Yes
No
Yes
No
No
figure
2,
on the previous page). It accepts RGBHV
B
on page 7).
XTP T USW 103 Switcher • Installation
Audio input selection
SIS
Audio Sent Over XTP
Analog audio
No audio
HDMI embedded audio
HDMI embedded audio
Analog audio
No audio
figure
2,
on the previous
C
5