1. Safety instructions FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperatureAvoid exposing it to direct rays of the sun or near a heating appliance. Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C. Keep away from humidity, water and dust Do not place the set in a location with high humidity or lots of dust.
2. Introduction Simulated rippling water effect 4 constantly changing dichroic colors Stop effect on a color Adjustable ripple speed High-power, 22W (1,360mA) LED Additional power output: max 100 units @ 240V 3. Product Overview 4. Setup 4.1. Fuse Replacement Disconnect the power cord before replacing a fuse and always replace with the same type of fuse.
4.2. Mounting This fixture may be mounted in any safe position. It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.