C
O
M
M
E
R
C
Diagram 3
Lift the rear of
the unit and roll
it to its assembly
location.
Rear end cap
Lift the unit by
grasping the
hand holds
inside the rear
end caps.
2. Make sure that the power switch is OFF. Check the ON/OFF power switch
on the front of the treadmill. Place the switch in the O (OFF) position. Make
sure that the treadmill is not plugged into a power source.
3. Move the treadmill. Diagram 3. Grasp the hand holds inside the rear end
caps and use proper lifting techniques to lift the rear end so that you can roll
the treadmill on its front wheels. To avoid injury to yourself or damage to the
unit, ask for help in maneuvering the treadmill.
Remove the
Diagram 4
hood.
Hood
4. Remove the hood. Diagram 4. Gently, lift the hood off the treadmill and set it
aside.
page 12
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N